A&D
GF-2000P Prescription Counting Scale |
Weighing
Capacity |
2100
g |
Minimum
weighing value |
0.1
g |
Repeatability/Std.
Dev. |
0.01
g |
Linearity |
±
0.02 g |
Certification |
Download
certificate Class II prescription balance scale for prescription
weighing and counting version
(NTEP Class II e=0.1g d=0.01g)
minimum unit mass for Counting mode is 3e |
Tare
Range |
To
capacity by subtraction |
Stabilization
time (Typical in FAST) |
Approximately
1 second. Review
the test data on response time |
Sensitivity
Drift |
±
2ppm / °C(When automatic self calibration is not used) |
Weigh
Modes |
g,
oz, lb, lb:oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, %, and DS |
Operating
Temperature |
5°C~40°C
/ 41°F~104°F RH less than 85% |
Sensing
Method |
Super
Hybrid Sensor (SHS) |
Display
Type |
Vacuum
Florescent Display (VFD) |
Display
Refresh |
5
times/s, 10 times/s or automatic (Selectable) |
Pan
Size |
165
x 165 mm / 6.5 x 6.5 inches |
Counting
mode |
Min
unit mass |
0.3
g |
Number
of sample |
10,
25, 50 or 100 pieces |
Percent
mode |
Min
100% reference mass |
1.00
g |
Min
100% display |
0.01%,
0.1%, 1% (Depends on the reference mass stored) |
Breeze
Break Dimensions
|
mm |
|
inch |
|
Standard
Interface |
|
External
calibration weights
(optional cal mass for external only) |
2000g
1000g |
Calibration |
Calibration
requires the purchase of one of the masses listed above for the specific
model. The GF Series like many of the other A&D balances
offers the ability to select different masses that best meets your weighing
application for calibration. To learn more about the selectable
calibration setting click here. We also offer a large selection
of calibration
masses here. |
External
Dimensions |
210(W)
x 317(D) x 86(H) |
Power
(AC Adapter ) |
100,
120, 220, 240 VAC (AC adapter) 50/60 Hz All balances
shipped with 120V AC Adapter. Other voltages add $25.00 |
Net
Weight (Approx.) |
4.3
kg / 9.6 lb |
Standard
Accessories |
Manual, AC Adapter, WinCT |
Optional
Accessories |
RS-232C Cable, SW-128 Foot Switch, Cover, All Glass Draft Shield, Printer |
Features
- click each icons for more information |

|
|
**
Specifications subject to change without notice |
Caveat
Emptor - Balance requirements vary from state to state. The requirements
are dictated with each state's pharmacy law and regulations. Determining
the requirements involves perusing each state's pharmacy law and regulations
to determine the requirements. Precision Weighing Balances suggests
contacting the agency that authorizes your pharmacy license for approval
of this balance prior to making the purchase. Although this balances
is approved on a national level as a pharmacy balance, state and local
agency may supersede with their own regulations. It
is the purchaser's responsible to verify using the above balance is in
compliance with your pharmacy license requirements. |