Sartorius FC12CCE-SX offers 12 kg weighing capacity that increments in 0.1 gram interval and is one of the few explosion-proof, intrinsically safe digital scales in the world. The large 8.5" x 7.9" stainless weighing platform offers plenty of room for placing most beakers, flasks, jugs or other container.
Sartorius FC12CCE-SX intrinsically safe balance is equipped with built-in motorized calibration weights, so you can check the scale's accuracy by a simple pressing of the keypad. The power jack and data output port are both on the weighing platform. The RS232C interface ensures secure data transfer over optional zener barriers or interface converters to the non-hazardous area; e.g., to a Sartorius YDP20-OCE printer or computer.
Family Mutual Approved for use in Class 1, Division I, Groups A,B,C,D hazardous environments. Complete detailed description about all these classifications can be found here.
The power supply for all FC-EX Series IS NOT INCLUDED and you must purchase separately either YPS02-ZKR safe area power supply for $1625 or YPS02-XKR hazardous area power supply for $1900. The Sartorius YPS02-XKR hazardous area power supply requires hard wiring by licensed electrician and comes with 8ft of intrinsically safe cable by 8ft cable.
Sartorius FC12CCE-SX has a wide array of application programs: check weighing, net total formulation, weighing in percent, statistics, totalizing, recalculation, differential weighing, calculation of weight values, and mass unit conversion. The explosion proof digital balance also offers several additional functions for combination: second tare memory, ID codes, product data memory and user-definable printout design.
If you're weighing hazardous liquids, solids or gases, the complete line of Sartorius explosion-proof scales can satisfy most of these stringent requirements. Because the scale is intrinsically safe there is no need for a bulky containment housing for most installations. All FC Series are ruggedly built with stainless steel platforms, strong cast aluminum housing and IP-54 rated against spills. Now you don't need to sacrifice accuracy for safety in hazardous environments.
Intrinsic safe balances protect so that the low energy of the intrinsically safe electrical circuits cannot cause ignition even when there are short circuits or sparks/arcs during fault conditions. For this reason, the cables of intrinsically safe equipment, for example, do not need to be installed in protective conduits.
kg, ct, lb, oz, ozt, tlh, tls, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol,
bat, MS and lb/oz
unit conversion by toggling, counting, weighing in percent, animal weighing,
calculations, density determination, over/under checkweighing, time-controlled
function, totalizing, statistics, 2nd memory tare, identifiers, product
- 0.4 seconds depended upon filter level selected
Ambient Operating Temperature
C to 40° C (32° F to 104° F)
85% RH or less
(10° - 30°C/50°F-86°F)
40 ppm / °C
- feature isoTEST - Fully automatic internal calibration.
At a touch of one key, the scale will calibrate itself automatically,
using a built-in-weight.
YPS02-ZKR Safe area power supply
(65 ft cable between scale and power supply)
YPS02-XKR Hazardous area power supply
(8ft of intrinsically safe cable x 8ft cable requiring hardwiring
by licensed electrician)
Cable, for connecting Sartorius accessories to FC series scales, 9.8 foot, 12-pin round (male) connector to 25 D-sub (female) connector
YDP20-OCE Data Printer with statistics and time/date functions, included cable fits RS232. (Requires the purchase of Zener barrier, YCC01-0016M3 Cable and 6971413 power supply to connect explosion proof balance to printer. Printer must be installed in Safe Area)
6971413 power supply for YDP20-OCE Printer
6960FB01 Base Dust Cover for FC06BBE-SX Explosion Proof Balance
6960FB02 Base Dust Cover for FC2CCE-SX, FC6CCE-HX, FC6CCE-SX or FC12CCE-SX Explosion Proof Balance
6960LP03 Dust Cover for display, fits all explosion proof scales