Airborne particulate matter for environmental air quality monitoring of air pollution measuring based on gravimetric analysis to one microgram readability can be achieved with the Sartorius MSE6.6S000DF. Air quality monitoring imposed by numerous government agencies call out in the standard operating procedure a microbalance for laboratory gravimetric analysis of particulate matter in the air quality testing methods. The net weight difference between pre and post sampling filter weights are used to calculate the ambient air mass concentration. The MSE6.6S000DF is Sartorius' lowest cost filter balance that reads to 1 µgram..
The special draft shield design makes this model particularly flexible in use: it is perfect for weighing the 47-mm filters specified in the EPA regulation. And it does more than shield samples from drafts: it also provides excellent shielding from electrostatic charges.
Sartorius MSE display features black and white liquid crystal display with simple operation and easy user guidance. The weigh indicator control unit is detachable.
MSE6.6S-000-DF filter balance offers a full resolution from 1ug to 6.6 grams.
Stabilize readings within an ultra fast 10 seconds, for maximum time savings with each weighing operation.
The location of a microbalance is critical since environmental conditions can dramatically affect the weighing performance. Many people call us shopping for a microbalance and their only interest is what is the cost of the microbalance forgetting they might need a static eliminator and spend $1000's to change the location they planned on installing the microbalance. The higher the lab balance resolution or accuracy, the more care must be taken with environmental conditions.
Installation is always best on the ground level on a concrete foundation since installing the micro-balance on upper floor levels are more prone to the possibility of floor vibrations due structural motion and pedestrian movements. If you can't install your microbalance on the ground level installing the micro balance in a corner outside wall is the next best location. Always try to stay away from the middle of the floor since this area bends the most. Also the higher floor levels the balance is located, the greater the building sway and even slight misalignment along the vertical to the center of the earth can introduce substantial weighing error.
A high precision microbalance should always be installed in a low traffic area. Due to the expense of the micro balance it should be in a restricted area to lessen the chance of unauthorized people from touching or using the microbalance.
Install a ultra-micro and micro balances in quiet, temperature and humidity controlled, draft-free location is of paramount importance. Finding a location in cleanroom can many times be challenging due to laminar air flow. So before even considering purchasing a high precision laboratory balance you should consider the area you want to install the microbalance since if your environment is not ideal you don't have a defective microbalance but a defective environment. You can read more about selecting a location of your lab balance here.
A solid balance table or marble slab is recommended to eliminate the surface the microbalance is installed on to prevent bending and any flexing. The weighing table should also be decoupled from the environment with an additional layer of shock-absorbing material such as rubber or cork to lessen sensitive to shock and vibrations. Wooden tables have some degree of flexure and typically unsuitable to attain repeatable consistent weighing results with a microbalance. Marble tables should not only have a marble top but also marble legs and these tables typically weigh several hundred pounds and cost well over $1000 and installation and freight will also be costly. Please consider these issues are additional costs and many times required for the microbalance to perform to the capabilities of the precision weighing instrument.
Once you have an adequate environment installing the microbalance isn't difficult, but for those customers wishing for professional installation it is available at an additional cost. Please call us at 978-521-7095 for current prices for these services, but the average cost is $425 in the lower 48 states of the USA plus travel and expenses. IQ/OQ testing is also available for an average cost of $875 plus travel and expenses.
Purchasing a micro balance is an extremely costly purchase and sometime even more expensive is creating the proper environment. If you have any technical questions or want to check availability give the balance experts at Precision Weighing Balances a call at 978-521-7095.
The Sartorius MSE6.6S000DF microbalance is made to order in Germany with a typical lead time of 6-8 weeks. To check availability give us a call for current delivery times. If this lead time is unacceptable we would recommend you consider the preconfigured MSA2.7S0TRDF which Sartorius tries to keep in stock.
Free shipping in the lower 48 states for the MSE6.6S000DF filter balance.
Download this brochure how Cubis can meet Advanced Pharma Compliance in Regulated Facilities
Cubis is the most advanced laboratory balance we offer at Precision Weighing Balances. Click the video above and learn about this state of the art weighing machine.
The Highest Precision for the Smallest Sample Sizes
Microgram filter balances allows users to measure particle emissions in diesel fuel in accordance with 40 CFR 86.1312-2007. The filter balance features an optimized low profile stainless steel draft shield which minimizes the effects of static electricity during filter weighing. It comes standard-equipped to weigh filters of up to 50mm diameter, with optional 75 and 90mm pan sizes also available.
Sartorius filter balance offers a full resolution from 0.1ug to 2.1g, meaning no further adaptations are required to allow the balance to be used for this highly specialized application.
Filter weighing balance is now being used by several of the world's leading automotive manufacturers, where it has been adapted for use with the customer's own software programs for data evaluation and storage. Emissions testing is important not only in the automobile industry but also in the petrochemical and oil industries, and the sartorius filter-weighing balance is just as well suited to these applications. Moreover it can also be used in research and testing institutions in the field of environmental technology, or indeed anywhere that the emissions produced by combustion processes are closely scrutinized.
The special DF stainless-steel filter
draft shield is optimized for ultraprecise
weighing of filters. This filter draft shield
minimizes electrostatic effects. Different
weighing pan diameters are available for
different filter sizes (50 mm as standard |
75 mm and 90 mm optional).
Q-Guide user interface: The reference for fast and targeted navigation
All Cubis controls are easy to use, clearly designed and logically structured. Their user guidance features prevent time-consuming and cost-intensive operating errors.
The MSA display and control unit shown above features a high-contrast TFT touch screen for clear and easy viewing, even of complex work sequences. Different sets of colors enable you to customize the screen to your individual needs. Clearly identified touch keys featuring positive click action let you effortlessly control the main basic functions of the balance. This ensures fast and error-free operation.
You can adjust the tilting angle of the display and control unit to ensure optimal viewing at all times.
The new Sartorius Cubis has been designed for users who always need the best, but who want to invest only in what is necessary.
Cubis: The most sophisticated weigh to focus on what is necessary
With Cubis, you will always stay at the cutting edge without having to invest in completely new equipment. This is what makes the Cubis modular design so special, with a number of unique advantages:
Optimal interchangeability or extension of modules
Shorter innovation cycles for individual modules
Faster development of additional modules
Apart from aspects strictly involving metrological specifications, preparing for and performing a weighing procedure and meeting the relevant regulatory standards are gaining ever-increasing importance.
The ratio between the steps of the actual measurement procedure and the accompanying steps are decisive criteria for the efficiency of work sequences, especially for complex and frequently recurrent applications. In designing Cubis, Sartorius Mechatronics focused on this major aspect.
The new Q-Guide enables tasks and individual work sequences to be quickly configured for error-free performance. The Cubis software and user interface eliminate the detours so you can get down to business.
Once you have defined a task, you are interactively guided straight to the settings needed for your application. Irrelevant information is hidden. Only the application mode you select is displayed, making navigation even easier. Just touch the USER key to gain access to User|Password Management. TASK enables you to select defined tasks directly.
isoCAL fully automatic calibration and adjustment
isoCAL motorized internal calibration ensures consistent, reliable and accurate weighing results. Also provides GLP compliant user-definable documentation and calibration record memory.
In a choice of three display and control units, Cubis meets the requirements of different operating concepts. It covers the entire range of laboratory applications from simple weighing right up to management of complex work sequences by means of defined tasks and the User | Password Management Menu.
MSA - the non plus ultra Top-of-the-line technology and information design. Touch screen featuring high-resolution color TFT for high-contrast display of texts and graphics. Outstanding operating convenience and display quality, especially for complex applications that require substantial text input. The optimal features and equipment to meet the very highest requirements, for example, in the pharmaceutical industry.
MSU - classic and universal High-resolution, generously sized, monochrome graphic display and keys that feature positive click action and precise activation of functions. For users who prefer to combine classic key-operated control with the widest range of performance features.
MSE - pure and simple weighing Large, high-contrast liquid-crystal display, easy-to-understand menu guidance with short text prompts; clearly structured keys for precise activation of functions. It offers the optimal basis for users who need to weigh with the highest accuracy, but have lower needs in terms of complexity of a weighing process and in data management.
The quality, reliability and precision of a Sartorius balance are legendary.
Cubis lives up to the legend: it sets new benchmarks in accuracy, response time and repeatability.
Unique monolithic weigh cell
Cubis incorporates the second generation of the world’s only monolithic weigh cell manufactured exclusively by Sartorius. And these exceptionally rugged weigh cells have become even more compact and precise.
The first lab balance with Q-Pan off-center load compensation
Cubis is the first lab balance that compensates for errors caused when a sample is off-centered on the pan. The Q-Pan feature offers you two advantages: it significantly reduces off-center loading errors, and thus enables Cubis to be designed with an extra-large weighing pan.
The first balance with automatic leveling: Q-Level
Q-Level combines novel sensors with the most advanced display technology, making it easier and faster to level the balance accurately. A standard feature of Cubis MSA and MSU display and control units, interactive prompting guides you during manual leveling. While Q-Level is active, the display shows you all the information you need: the position of the air bubble as well as prompts so you know which leveling foot has to be turned in which direction (MSE only with an alert message).
Q-Level also provides the option of fully automatic, motorized leveling at the touch of a key. Leveling could not be easier or more convenient than this.
Select from these microbalances that meet your specific weighing needs