VMC is consistently out of stock on their counting scales. Because of the fact that they do not maintain inventory, we are gradually removing their products from our website.
We recommend the A&D HC-15Ki model as being the closest equivalent. A&D HC-i series parts counting scales are quality counting scales that are always in stock.
Vending Route Drivers, Car Washes, Casinos, Laundromats, and Amusement Centers
use the VW-330A-C-15000 Counting Scale to count quarters fast. Time is
money and this counting scale can pay for itself in labor cost savings real fast.
This counting scale is not specifically designed for counting coins so it won't
show the dollar amount, but instead the number of quarters on the weighing pan.
Simply set the sample size to 5 pieces, place 5 quarters on the scale and then
pile on the quarters on the weighing pan and the scale will tell you the total
number of quarters. Again this counting scale is not designed only for
coins so you can also count hardware like hinges and knobs if you were a cabinet
VW-330A-C-15000 Counting Scale increments in 0.001 lb divisions and the total weight
on the weighing pan should be no more than 33 lbs. Toggle the switch located on the bottom of the scale converting to kilograms and offers 15 kg capacity and increments in 0.0005
Counting scale with high or ultra high internal resolutions (1 part in a million
or two million) and sensitivity. What does this mean to my counting accuracy???
The internal resolution or sensitivity is the ability for the scale's internal
analog-to-digital processor to identify and count the number of unfiltered divisions
of the scale's or load cell's output. Note: the scale output is usually
about half of load cell output due to dead loading on the platter and some safety
99% of the counting scales below $1000 are built with aluminum counterforce or
also called load cell sensors. They are typically accurate from 1 part in
3000 to 1 part in 10,000 divisions. Yes, scales and balances can display
the weight to 30,000 divisions or even up to 100,000 divisions, but they are not
metrologically accurate to this level. Sensitivity of 1 million count is
the ability to further differentiate 100 divisions within 1 part in 10,000 divisions.
However, if the sensor is not accurate or linear, the counting accuracy has no
relevance. This is unlike lab scales with magnetic force sensors (the A&D
FC-5000Si & FC500Si
has a force motor) the linearity is much better than resistive strain
gauge sensors where it measures the "bending of metals".
What is most important in load cell counting scale, similar to precision balances,
is the quality of the sensor or load cell. VW330AC uses one of the best and
most costly HBM sensors which is known worldwide for its accuracy. VMC puts
your dollars into quality components and not marketing hypes.
Virtual Measurements & Controls (VMC) gives you value, quality and satisfaction.
VMC is a young 10 year old company with speed and agility to design, manufacture
and bring the best products to you but without the overheads of other scale manufacturers.
The savings are all yours when you select the VW-330A-C-15000 Counting Scale.
VMC has ended business operations in the USA and NONE of the VMC models are available. Information on this web page is for reference only for our past customer's that purchased this digital scale and want to review the specification. If you need assistance selecting an alternative model give us a call at 978-521-7095 and a balance expert can assist in alternative models.
VMC VW-330A-C-15000 Counting
|VirtualMC VW-330A-C-15000 Counting Scale
|PWB Discount Price
|S&H via UPS Ground
|Capacity x Readability (pounds)
||33 lb x 0.001 lb
|Capacity x Readability (kilograms)
||15 kg x 0.0005 kg
||± 0.001 lb
||± 0.001 lb
||± 0.001 lb
||± 0.002 lb
||> 1.5 seconds
|Zero (Tare) Range
||100% of weighing capacity
||lb, kg, pcs
||Large (0.47") 12mm LCD display with backlight
|Pan Size (inches)
||8.9" x 13.3"
||11.2" x 13" x 5.1"
||Rechargeable battery (included)
AC Adapter (included)
|Low Battery Indicator
|Auto Shutdown/Power Saving
|External Calibration (NOT Included)
||Minimum of 50% weighing capacity
||32 - 104°F / 0 - 40°C
||1 Year Limited Manufacturers Warranty -
Return to base California
| Instruction Manual
|| Download the instruction manual for tons of information on how to operate scale.
Low Battery Indication
Lack of sample, piece weight indication
Alarm function to highlight shortage of sample
Large stainless steel weighing platter
Ten numeric key for setting of sample number, sample weight
3 Column LCD weight display-Weight (kg), Unit Weight (g), Total (pcs)
Over/Under Alarm Buzzer
|Compare the VMC parts counter to our other available counting scales
|Copyright © 2017 Precision Weighing Balances,
All Rights Reserved. This site is owned and operated by Precision
Weighing Balances who is an Authorized Virtual Measurements & Controls
(VMC) Dealer. For warranty, parts and technical related issues please
call VMC directly at 707-573-3111.
Disclaimer/Legal Information Sitemap