The FX300i from AND Weighing offers 320g with one milligram readability.
A&D has build an amazing low cost magnetic force restoration balance that performs lightening fast using their Super Hybrid Sensor technology. This patented weigh cell provides quick stabilization speed with accurate weighing result in 1 second resulting in better productivity. The compact size and small footprint is something no other competitor brand can offer.
The vacuum fluorescent display enables easy-to-read weighing results even in poor lighting conditions.
The FXi Series comes standard with RS-232C interface for bi-directional communication with a PC, printer or other peripheral devices. When purchased with the optional AD-8121B printer you'll be GLP/GMP/GCP/ISO Compliant. In accordance with GLP and LIMS regulations, the balance ID number and calibration data can be printed out using AND Weighing AD-8121B or a PC. There is an optional FXi-02 USB Interface, but it is only uni-directional. Most people want bi-directional so they can send and received data from the balance. When the FXi-02 USB Interface is installed you must remove the RS-232C interface.
An optional FXi-11 large breeze is available if you are weighing in an environment that is less than ideal to prevent air currents from causing the balance pan from moving, which results in fluctuating readings. By protecting the balance weighing platform with a draft shield a stable constant mass reading can be observed. This shatterproof breeze break has an antistatic coating and can be opened from the right and left side and also through the top.
The FX-i meets EMC regulations and is immune to the effects of electromagnetic fields of up to 10V/m
All FX-i balances are backed with a 5 years manufacturer warranty making it the longest manufacturer warranty in the industry for a high quality lab balance.
Haven't heard of A&D Weighing? They are the third largest manufacturer of laboratory balances and scales in the world. Corporate headquarters are based in Japan but US offices in California and Georgia. All FX-i balances are backed with a 5 years manufacturer warranty making it the longest manufacturer warranty in the industry for a high quality lab balance.
Another selling point is AND Weighing fabulous product support. A&D Weighing has a dedicated product support line by calling 1-800-726-4940 6:00 am to 5:00 pm PST. Finally the A&D is simply to use and configure. The product manual is written for the average person to configure their scale verses having to spend $100's calling for scale company help you figure out how to use the balance.
If you require a Legal for Trade weighing device for like a pharmacy and was told to buy the FX-300i the correct model is the FX-300iN. The FX300i and FX300iN to most people look exactly the same but they are different. If you purchase the FX300i and think you can fool the Weights & Measures Inspector it is a very slim shot. The Legal for Trade version FX-300iN cost slightly more money since there is a special sealing plate and sealing screws. The FX-300iN can be sealed by threading a wire security seal through two screws on the RS-232 serial interface plate and scale housing. This prevents access to the calibration switch inside the device which is required to meet the requirements for a Legal for Trade weighing device.
See the full line of FX-i balances at the bottom of this web page or click here.
Before you make your final selection be sure to see the new Sartorius ENTRIS323-1S or ENTRIS423-1S. The FX-300i uses a Super Hybrid Sensor which combines magnetic force restoration and single-point parallelogram load sensing technologies. The Sartorius Entris323-1S uses a monolithic magnetic force restoration for even more accurate & stable weighing results. The Sartorius Entris323-1S is made in Germany & has a glass draftshield while the FX-300i is made in South Korea and has a plastic draftshield.
If you were told to buy a Legal for Trade, Class 2 balance and the model is FX-300i - then someone told you the WRONG INFORMATION. You need to buy the FX-300iN HERE. So what is the difference and why is there so much confusion? Hopefully this youtube video above will clear those issues up do you don't purchase the wrong balance and you keep your Weights & Measures Inspector happy.
The FXi-10 small breeze break comes standard with the FX/FZi milligram balances(0.001 gram) and can be upgraded by purchasing the optional FXi-11 large breeze break. The FX/FZi precision balances (those that increment in 0.01 gram divisions) do not come with any windshield, but can be purchased with either optional accessory FXi-10 small breeze break or FXi-11 large breeze break.
Top View of FX-i series A&D Precision Balance
The new A&D FX/i series precision balances come in several weighing capacities to accommodate your specific weighing needs. Choose between 0.01 gram or 0.001 gram increments. New FXi Precision scales with milligram resolutions include a small breeze break for precise weighing. Get accurate weighing results with the latest precision scale from A&D!
In the video above we offer an overview of the components of the Entris milligram balance and how to assemble. Calibration is simple using an optional external calibration mass. We demonstrate the fast response time, repeatable weighing results and features like the leveling bubble, adjustable feet, RS-232 interface and more.