810g with 1 milligram readability, standard built-in RS-232 interface and internal calibration at a touch of the button.  All GX/GF Series feature the newest level of state of the art weighing technology incorporating the Super Hybrid Sensor - technology certainly to dominate in the 21st century.  The GX-800 features internal motorized calibration with a generous proportioned 5" x 5" stainless steel weighing pan.  A&D is made in Japan and the third largest manufacturer in the world for precision laboratory balances and scale in the world.  A&D Weighing has two facilities in Milpitas, California and Norcross, Georgia to back and support the 60 month manufacturer warranty.

Plus A&D is backed with a 5 year limited manufacturer warranty and the last time we checked Sartorius & Mettler had a much shorter warranty.  Oh, Yes A&D comes with free data acquisition software WinCT allowing you to import the data into your PC software, such as Windows based Word/Excel software.  The balance data communication software is included as standard equipment unlike other manufacturer's that charge $100's for their software.  Plus the GX800 milligram balance can be purchased with the optional GX-29 Bluetooth wireless interface enabling you can transmits data up to 30 feet.  Add it all up and A&D is going to turn the weighing industry on their heads offering quality products, always in stock, spectacular technical support, plus A&D service centers on both the East and West Coast and finally great PRICES!!!!!

The GX-800 comes standard with a low cost breeze break were the operator accesses the weighing platform by lifting the top cover.  There is an optional GX-10 draft shield with three sliding glass doors allows for easy access from the right, left or top.

A&D Lab Balances are accompanied by the industry leading five-year warranty, assuring long lasting quality and performance. Compare all the features, standard accessories, and price and you'll see it's tough to pass up purchasing any of the A&D Weighing Laboratory Balances for your precision weighing needs. 

Need to use the balance in a area without a computer??  No problem A&D offers an optional 8121A data printer to meet your GLP/GMP requirements.

Many people call us looking for the absolute best value Precision Weighing Balances can offer in a milligram balance and the answer again and again is the Sartorius GC2502.  These customers are not looking for the lowest priced milligram balance, but instead how can they get the most balance for their money relative to the specifications each balance offers.  We believe the value is unmatchable in the GC2502 since you get lightening fast weighing results, 500 grams weighing capacity with 1 milligram readability, high quality 3 door removable draftsheild, included 200 gram external calibration mass and all topped off with a 3 year limited manufacturer warranty.  You can read more about the Sartorius GC2502 HERE.

A&D GX-800 mg balance

A&D is a recognize leader in precision weighing instruments and has developed significant technical breakthroughs in design and manufacturing.  In 1985, for the first time in the balance industry history, A&D incorporated digital calibration and multi-point linearity adjustment in their analytical balance series.  By exploiting chip technology, A&D was the first to bring surface-mount technology to the miniaturized PC boards to the weighing industry .  They brought extremely competitive counting, bench, and compact scales to the market by deploying aluminum to manufacture the most cost effective, reliable load cells.  Using innovative designs and progressive manufacturing techniques, A&D brought cost effective, RFI-immune digital weight indicators to the market place.  Today, A&D is proud to continue this tradition of innovation.  Introducing the Super Hybrid Sensor.  This new, innovative sensor is a core technology certain to dominate in the 21st century.

Features Fast, new Super Hybrid Sensor (SHS) gives you the ultimate in response speed - Just ONE Second! Internal Calibration and Internal Calibration Mass makes calibrating your GX Balance easy when you relocate or bump your balance. Just push a button! Automatic Self-Calibration calibrates the balance when it detects changes in the ambient temperature Large, bright Vacuum Fluorescent Display - see the display even in the dark Percentage, Counting Functions & Comparator functions ACAI Counting Function for highly accurate counting There are so many more features to reinforce that the GX-Series is one of the finest precision weighing balances that you should click here to learn more All A&D GX-Series come standard with built-in RS-232c and A&D WinCT balance communication software on CD-Rom to interface your balance with your computer.

A&D Model: GX-800
Your Cost		$1978.90
Weighing Capacity		810 g
Maximum Display		810.084 g
Resolution		0.001 g
Repeatability/Std. Dev.		0.001 g
Linearity		± 0.003 g
Tare Range		To capacity by subtraction
Stabilization time (Typical in FAST)		Approximately 1 second. Review the test data on response time
Sensitivity Drift		± 2ppm / °C (When automatic self calibration is not used)
Weigh Modes		g, oz, lb, lb:oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, %, and DS
Operating Temperature		5°C~40°C / 41°F~104°F RH less than 85%
Sensing Method		Super Hybrid Sensor (SHS)
Display Type		Vacuum Florescent Display (VFD)
Display Refresh		5 times/s, 10 times/s or automatic (Selectable)
Pan Size		128 x 128 mm / 5 x 5 inches
Counting mode	Min unit mass	0.001 g
	Number of sample	10, 25, 50 or 100 pieces
Percent mode	Min 100% reference mass	0.100 g
	Min 100% display	0.01%, 0.1%, 1% (Depends on the reference mass stored)
Breeze Break Dimensions	mm	Internal: 145(W) x 145 (D) x 90(H) mm (standard Plastic Breeze Break)
	inch	Internal: 5.7(W) x 5.7(D) x 3.6(H) in (standard Plastic Breeze Break)
Breeze Break Dimensions	mm	Internal: 163(W) x 195 (D) x 208(H) mm (with optional GX-10 Glass Breeze Break)
	inch	Internal: 6.4(W) x 7.7(D) x 8.2(H) in (with optional GX-10 Glass Breeze Break)
Standard Interface		RS-232c with Windows Communication Tool (WinCT)
External calibration weights (optional cal mass for external only)		200g, 300g, 400g, 500g, 600g, 700g, or 800g - Class 1
Calibration		Motorized Internal Calibration
External Dimensions		210(W) x 317(D) x 86(H)
Power (AC Adapter)		100, 120, 220, 240 VAC (AC adapter) 50/60 Hz All balances shipped with 120V AC Adapter. Other voltages add $25.00
Net Weight (Approx.)		4.6 kg / 10.1 lb
Standard Accessories		Manual, AC Adapter, WinCT
Optional Accessories		RS-232C Cable, SW-128 Foot Switch, Density Determination Kit, Cover, All Glass Draft Shield, Printer
Features - click each icons for more information
Brochure		Click Here To Download For More Info
Data Brief		Download For Additional Specifications
Download the Instruction Manual (5.99 MB) now  You need Adobe Acrobat Reader to view.  The instruction manual contains detail information regarding calibration, additional features and keypad functions.  Download the manual for the Density Determination Kit (808KB), Comparator or Analog Output (1.22MB).

A&D GX Series Toploader Balances Download the User Manual (5.99 MB) (select the model & any of the options below and then click the "BUY HERE" image) GX-200[210g x 0.001g] $1274.35 GX-400[410g x 0.001g] $1597.75 GX-600[610g x 0.001g] $1898.05 GX-800[810g x 0.001g] $1978.90 GX-1000[1100g x 0.001g] $2082.85 GX-2000[2100g x 0.01g] $1274.35 GX-4000[4100g x 0.01g] $1720.95 GX-6100[6100g x 0.01g] $1898.05 GX-6000[6100g x 0.1g] $1478.40 GX-8000[8100g x 0.1g] $1613.15

Options Universal Specific Gravity Kit $139.95 Lock Down Device $38.00 RS-232 to USB converter kit for A&D Weighing Balances $99.95 GX-02 USB Option (replaces RS232 port with USB port) $120.00 GX-04 Comparator Output $170.00 GX-06 - Analog Output (Factory Installed Only) $549.00 GX-10 - Glass Breeze Break $254.00 GX-13 - Density Determination Kit $450.00 CC:102E - Demo/Storage/Carrying Case $145.00 AD-1682 - Rechargeable Battery Pack $465.00 AD-8920 - Universal Remote Display $250.00 AD-100-2 - Anti-Theft Device $54.00 SW:128 - Foot Switch $69.00 AX : 073003691-S - Protective In-Use Cover $17.00 TB:110C - AC Adapter (120V) Standard with unit $39.00

Optional Calibration weight and weight sets includes Certificate of Calibration showing conventional mass correction. 1 mg -100 g 21 piece Ulti Mass $1620.00 1 g -100 g 9 piece Ulti Mass $650.00 50 g ASTM Class 1 (± 0.12 mg) cal mass $95.00 100 g ASTM Class 1 (± 0.25 mg) cal mass $100.00 200 g ASTM Class 1 (± 0.50 mg) cal mass $140.00 500 g ASTM Class 1 (± 1.2 mg) cal mass $170.00

Animal weighing. For maximum accuracy, the entire GX Series can be programmed to average readings over a set period of time -- ideal for weighing lab animals or for work in unstable environments.   RS232C serial interface. Maintain permanent records of your work.  WinCT software imports the weighing data into your Excel Spreadsheet or MS Word document.   High-performance and precision at a surprisingly affordable price.   Conforms to GLP, ISO and Lims. Outputs ID and serial number to a computer or the optional AD-8121B Printer   Parts counting with ACAI software. Speed up inventory and process control.   Built-in under hook for magnetic material and density measurement

Select from 10 Toploader Balances to meet your specific weighing needs
Model	Cap (g) x Read (g)	Pan Size	Price
GX-200	210 x 0.001 g	5" x 5"	$1274.35
GX-400	410 x 0.001 g	5" x 5"	$1597.75
GX-600	610 x 0.001 g	5" x 5"	$1898.05
GX-800	810 x 0.001 g	5" x 5"	$1978.90
GX-1000	1100 x 0.001 g	5" x 5"	$2082.85
GX-2000	2100 x 0.01 g	6.5" x 6.5"	$1274.35
GX-4000	4100 x 0.01 g	6.5" x 6.5"	$1720.95
GX-6100	6100 x 0.01 g	6.5" x 6.5"	$1898.05
GX-6000	6100 x 0.1 g	6.5" x 6.5"	$1478.40
GX-8000	8100 x 0.1 g	6.5" x 6.5"	$1613.15

Copyright © 2009 Precision Weighing Balances, All Rights Reserved.  This site is owned and operated by Precision Weighing Balances who is an Authorized A&D Weighing Dealer.

Disclaimer/Legal Information      Sitemap