SARTORIUS
GD503 CLASS II LEGAL FOR TRADE with 100G Cal Mass |
PWB DISCOUNT PRICE
S&H via UPS Ground is $30 |
| Capacity x Readability (g) |
100 g x 0.0001 g (Menu code 1.7.1) |
| Capacity
x Readability (g) |
100 g x 0.0002 g (Menu code 1.7.2) |
| Capacity x Readability (ct) |
500
ct x 0.001 ct (Menu code 1.7.4) |
| Capacity
x Readability (lb) |
0.22085
lb x 0.00001 lb (Menu code 1.7.5) |
| Capacity x Readability (oz) |
3.53361
oz x 0.00001 oz (Menu code 1.7.6) |
| Capacity
x Readability (ozt) |
3.22074 ozt x 0.00001 ozt (Menu code 1.7.7) |
| Capacity
x Readability (GN) |
1545.955
GN x 0.005 GN (Menu code 1.7.11) |
| Capacity x Readability (dwt) |
64.4148 dwt x 0.0001 dwt (Menu code 1.7.12) |
| Capacity x Readability (mg) |
100176.2 mg x 0.2 mg (Menu code 1.7.13) |
Legal
for Trade
(NTEP approved) |
YES - CofC 05-099 Legal for Trade in gram & carat mode ONLY |
| NTEP Capacity x Readability (g) |
100 g x 0.001 g |
| NTEP Capacity x Readability (ct) |
500
ct x 0.01 ct |
Reproducibility (std deviation)
carats (ct)
grams (g) |
± 0.001 ct
± 0.0001 g |
Linearity
carats (ct)
gram (g) |
± 0.002 ct
± 0.0002 g |
| Scale
interval d |
0.0001
g |
| Verification scale interval e |
0.001 g |
| Response Time (average) |
3
seconds |
| Tare
Range |
FULL
to Capacity |
Selectable Weight Units
|
g, ct, lb, oz, ozt, tlh, tls, tlt, Gn, dwt, mg, parts/lb, tlc, mom, K,
tol, bat, and MS. In LFT mode the the GD503
weighs in Carat & Grams ONLY |
| Selectable Application Programs |
Mass unit conversion by toggling, tare memory, net total, weighing in
percent, counting, averaging. Counting
function not legal for trade |
| Display Update |
0.1 - 0.4 seconds depended upon filter level selected |
| Display |
LCD |
| Allowable Ambient Operating Temperature |
20° C to 35° C (68° F to 95° F)
85% RH or less |
Sensitivity
Drift
(10° - 30°C/50°F-86°F) |
± 2 ppm / °C |
| External Calibration |
100g INCLUDED |
| Pan Size |
ø90 mm / 3.5 in
(standard round pan) |
Draft Shield Chamber Height
(from pan to top of glass door) |
133 mm / 5.23 in |
Dimensions (entire balance)
W x D x H |
200
x 270 x 233 mm
7.9 x 10.6 x 9.2 in |
| Built-in RS-232 Interface |
YES
- RS-232 interface is standard but the RS-232
cable is optional |
| Weighing Below |
Not
Available. Common applications for weighing below the balance include
density determination. |
| AC Power Source |
AC
Adapter 120 VAC |
| Power Consumption |
Approx.
16VA (supplied by AC adapter) |
| Standard Equipment |
120V
AC Adapter, Dust Cover, Stainless steel weighing pan, 100g external
cal mass |
| Optional Accessories |
Printer, RS-232
cable, RS-232 to
USB converter kit, Rechargeable external battery pack, WinWedge data
transfer software |
| Warranty |
12 month manufacturer's limited warranty |
| Net Weight, Approx. |
2.8
kg / 6.2 lbs. |
 Brochure |
 Download the brochure loaded with tons
of information. |
| User Manual |
 Download the Instruction
Manual for the GD503 loaded with tons
of information. |
|
 |
| The
GD503 is ergonomically designed with a sleek look and rounded corners.
Standard bi directional RS-232 interface allows communication to a pc
or Sartorius
printer. |
| |
 |
| High
resolution with stability and very fast response for operator comfort
and efficiency. The GD503 comes standard with 120V AC Adapter, dust cover & Class F1 external 100 gram cal mass at no additional
cost. |
| |
|
|
| |
 |
|
 |
Image taken
from the rear of the
GD-503. Features RS-232 interface. |
|
Polished
stainless steel weighing pan, ring and floor makes cleaning simple. |
| |
|
|
 |
|
 |
| Innovative
high-grade draft shield with low profile design resulting in less bench
space compared to conventional analytical balances (height from pan to
top of glass door is only 5.23 inch). Draft shield offers 3 sliding
doors that slide open quietly and effortlessly. |
|
Leveling
the balance with the 2 front adjustable feet is a breeze. The identification
badge is located on the left side of the GD503 Class II NTEP Approved
Balance in accordance to National Conference on Weights and Measures. |
| |
|
|
 |
|
 |
| Balance
set in LFT mode in carats. Notice the last digit is "boxed" |
|
Balance
set in LFT mode in grams. Notice the last digit is "boxed" |
| |
|
|
 |
|
 |
| Bottom
side of GD503 balance shows the two front adjustable feet and tamper evident
sticker across access plate and the balance housing. |
|
When the
balance is used in legal metrology (a.k.a NTEP mode) external calibration
is blocked by a seal over the access plate. |
| |
|
|
| |
 In
accordance with weights and measures regulation the balance must be
sealed to prevent tampering and re-calibration once the balance is placed
in service. To prevent access to the calibration switch a tamper
evident seal is placed across the access plate and bottom housing.
The Weights and Measures Inspector will place this seal on the balance
once the inspector has tested the balance and places the balance in
service as a legal for trade device. |
| |
|
|
 |
| Handbook 44 requires the identification
badge specify the model number, serial number, "d" - display
division, "e" - verification scale interval and
the National Type Evaluation Program Certificate of Conformance (NTEP
CC) |
 |
| Balance
is set to non-NTEP mode since the least significant digit is
not "boxed" |
 |
| Balance
is set to NTEP mode since the least significant digit is
"boxed" |
 |
|
 |
| Spectacular
packing insures your analytical balance is delivered without damage. |
|
Styrofoam
packing surrounds your Sartorius Analytical Balance lessen the chances
of any damage due to rough handling by the shipping carrier. Like
we always say - to the shipper like UPS, fragile means football and the
Sartorius is designed to handle the delivery. |
| |
|
|
| |
|
|
 |
Easy-to-clean
display that is highly resistant to chemicals. High contrast LCD
(height of digits: 13 mm / 0.5")
Keys with positive click action for reliable and confident activation
of specific functions. Keypad holds its shape even after repeated
use. Toggles between two selected weigh units at the touch of a
key
Easy-access, all-glass weighing chamber and easy-to-remove and easy-to-clean
high-grade stainless steel weighing pan. Weighing chamber base plate
is easy to clean because all parts can be simply removed |
| |
 |
|
Analytical Balances
money order
quote request
