GF200 digital milligram scale is the same high quality features of the A&D GX200 without motorized internal calibration weight. This state of the art laboratory milligram measurement instrument incorporates the Super Hybrid Sensor (SHS) weigh cell delivering you the ultimate in response speed - Just ONE Second.

The stabilization time of one second is achieved when FAST is selected for the response rate to read a displayed value after a sample is placed on the pan. Other features include: a data memory function to store up to 40 sets of weighing data; Good Laboratory Practice (GLP) data output using the standard RS-232C serial interface; Large bright vacuum fluorescent display which lets you read the display from wherever you are working, even in a dimly lit area; Comparator Indicators displaying the comparison results; Capacity Indicator, displaying the weight value in percentage relative to the weighing capacity; Hold Function, provided for weighing a moving object such as an animal; Underhook, for measuring density and weighing magnetic materials; Density Mode, for calculating the density of a solid; Reference Card, provided for a quick reference to the balance operation; IP54 level dust & splash; Patented Super Hybrid Sensor (SHS)

To keep cost low A&D designed the GF200 with the short plastic breeze break. To place item(s) on the weighing platform one needs to lift off the plastic top and place the sample on the weighing pan and then put the cover back on. To increase your efficiency in weighing samples(s) many customers decide to purchase the optional AND GX10 glass breeze break. The GX10 has 3 doors that will allow the operator to place items on the weighing platform for the top, left or right side. We always recommend the optional GX10 but this adds over $265 more to the cost of the GF200.

When the GF200 lab balance is first installed or when it is moved to another location, it should be calibrated to ensure accurate weighing results. We offer a full line of calibration weights including the recommended 200 gram calibration weight for the GF200. Every location in the world is positioned differently to "magnetic north" and therefore the acceleration of gravity is slightly different. In addition, barometric pressure effects the acceleration of gravity depending upon your location's altitude to sea level. This is why the user manual always states to calibrate the balance prior to weighing. Please scroll down further on this web page and you can see all the available accessories.

A&D Weighing balances equipped with the RS-232 interface can use AND's WinCT data acquisition software data communication software. Other manufacturer's charge you $100's more for either their balance communication software or a third party software but not with the A&D you can download WinCT balance software free.

High performance and quality is shown with a 5 year manufacturer warranty. Review the manufacturer warranty from other manufacturer's and you'll see their warranty is a lot less. Plus if you ever need repair A&D Weighing has two facilities in the USA located in Georgia and California for fast turn around.

If you prefer to just buy a milligram balance that comes standard with an all glass draftshield please consider either the Sartorius Practum 213-1S or Quintix 213-1S milligram balance. Plus the Sartorius Practum and Quintix come standard with USB interface while the A&D GF is a serial RS-232 interface and in today's technological age serial RS-232 is a thing of the past.

Are you working in a pharmaceutical lab and need to comply with stringent FDA requirements and must comply with SQmin ? Be sure to review Secura 213-1S since none of the A&D GF models allow you to enable SQmin and additional safety weighing features like the ability to program the minimum weight value so when you attempt to weigh samples below a set threshold the weight reading is displayed on screen in red. Secura is one of the world's most technologically advance weighing instrument we offer and also has built-in level verification, password protection, and memory tracking is also available. The Sartorius Practum, Quintix and Secura all feature a touch screen user interface for easy balance configuration.

We understand purchasing a quality milligram balance is a major capital expense and if you have any questions give us a call and one of our weighing experts can discuss your weighing application and get you the most affordable balance for your weighing needs. Precision Weighing Balances has been selling lab balances online since 1995 and we know balances so well we've been hired by some of the most prestigious law firms in America as an expert witness. Sadly, most of the catalog companies and vendors online have never even turned on a balance and can't answer any questions about how the balance functions.

If price is absolutely the #1 factor in you purchasing a 210 gram balance with 0.001g readability designed with a force restoration magnetic motor then we would recommend you take a look at the AND Weighing FX-200i. or new Sartorius ENTRIS323-1S

Free shipping UPS Ground in the lower 48 states on all AND GF lab balances at www.balances.com

A&D Weighing GF-200 Mg Balance

The GF-Series offers all the spectacular features of the GX-Series except the internal motorized calibration feature has been removed.  Therefore, the GF200 milligram lab balance has the same display, features,  ip-65 rating, SHS technology except there is no internal calibration mass.  ISO 9000 procedures favor the calibration of balances with an external certified calibration mass.  A balance with internal motorized calibration weight is a nice feature, but costly.  Most balances with the internal calibration feature also offer external calibration.  External calibration is vital since it is much more convenient to send out the external calibration mass for recalibration/certification verses the costly fee of having the internal calibration mass removed from the balance and sent out for re-calibration. In addition, if you own several of the same balances just one external traceable calibration is needed for ISO compliance. Precision Weighing Balances always recommends that you purchase the calibration mass with any balance you select.  This allows you to calibrate the unit yourself without requiring the services of an outside calibration firm.  Best of all calibration couldn't be simpler.  Connect the AC adapter and warm up the balance with nothing on the weighing pan.  Then simply turn "ON" the balance, allow the balance to go through the power-up routine and then press and hold the "CAL" until "CALout" is displayed.  The display walks you through the cal procedure in less than 1 minute.  The entire cal is controlled by the user-friendly keypad.  The days of opening the balance and tweaking those potentiometers and trim resistors to calibrate a scale are gone with the advent of the digital circuit and EPROM technology first implemented by A&D Engineer's.

All A&D GF-Series come standard with built-in RS-232c and A&D WinCT balance communication software on CD-Rom to interface your balance with your computer.

A&D Model: GF-200
Your Cost		$1070.00
Free UPS Ground shipping in the lower 48 states of USA
Before you make your final selection be sure to see the new Sartorius ENTRIS323-1S since we have special promotional pricing on the Entris323-1S allowing you to buy it for A LOT LE$$ than the GF200. The AND GF200 is a great milligram balance but people are always calling for available lower cost equivalent and the Entris 323-1S is something you should review.
Weighing Capacity		210 g
Minimum weighing value		0.001 g
Repeatability/Std. Dev.		0.001 g
Linearity		± 0.002 g
Tare Range		To capacity by subtraction
Stabilization time (Typical in FAST)		Approximately 1 second. Review the test data on response time
Sensitivity Drift		± 2ppm / °C (When automatic self calibration is not used)
Weigh Modes		g, oz, lb, lb:oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, %, and DS
Operating Temperature		5°C~40°C / 41°F~104°F RH less than 85%
Sensing Method		Super Hybrid Sensor (SHS)
Display Type		Vacuum Florescent Display (VFD)
Display Refresh		5 times/s, 10 times/s or automatic (Selectable)
Pan Size		128 x 128 mm / 5 x 5 inches
Counting mode	Min unit mass	0.001 g
	Number of sample	10, 25, 50 or 100 pieces
Percent mode	Min 100% reference mass	0.100 g
	Min 100% display	0.01%, 0.1%, 1% (Depends on the reference mass stored)
Breeze Break Dimensions	mm	Internal: 145(W) x 145 (D) x 90(H) mm *
	inch	Internal: 5.7(W) x 5.7(D) x 3.6(H) in *
Standard Interface		RS-232c with Windows Communication Tool (WinCT)
External calibration weights (optional accessory)		200g 100g
Calibration		Calibration requires the purchase of one of the masses listed above for the specific model.  The GF Series like many of the other A&D balances offers the ability to select different masses that best meets your weighing application for calibration.  To learn more about the selectable calibration setting click here.  We also offer a large selection of calibration masses here.  If you prefer internal motorized calibration see the GX-Series.
External Dimensions		210(W) x 317(D) x 86(H)
Power (AC Adapter )		100, 120, 220, 240 VAC (AC adapter) 50/60 Hz All balances shipped with 120V AC Adapter. Other voltages add $25.00
Net Weight (Approx.)		3.8 kg / 8.4 lb
Standard Accessories		Manual, AC Adapter, WinCT
Optional Accessories		RS-232C Cable, SW-128 Foot Switch, Density Determination Kit, Cover, All Glass Draft Shield, Printer
Features - click each icons for more information
Download the GF Series Instruction Manual (1.94 MB) now   You need Adobe Acrobat Reader to view.  The instruction manual contains detail information regarding calibration, additional features and keypad functions. Download the manual for the Density Determination Kit (808KB), Comparator or Analog Output (1.22MB).
** Specifications subject to change without notice

A&D GF Series Toploader Balances Download the User Manual (2.0 MB) (select the model & any of the options below and then click the "BUY HERE" image) GF-200 [210g x 1mg] $1070.00 GF-300 [310g x 1mg] $1252.50 GF-400 [410g x 1mg] $1425.00 GF-600 [610g x 1mg] $1910.00 GF-800 [810g x 1mg] $2094.00 GF-1000 [1100g x 1mg] $2246.25 GF-1200 [1210g x 0.01g] $1032.00 GF-2000 [2100g x 0.01g] $1070.00 GF-3000 [3100g x 0.01g] $1252.50 GF-4000 [4100g x 0.01g] $1528.00 GF-6100 [6100g x 0.01g] $2062.50 GF-6000 [6100g x 0.1g] $1425.00 GF-8000 [8100g x 0.1g] $1671.00 Check here to see the special version of the GF-200P Class II prescription scale denoted as GF-P and other prescription balances.

Options "N" Version designates NTEP (Legal for Trade) $45.00 Universal Specific Gravity Kit $139.95 GX-13 - Density Determination Kit $595.00 AD-100-2 Digital Scale Anti-theft Device $73.00 USB to 25 pin RS-232 Converter $77.00 GX-02 USB Option (replaces RS232 port with USB port) $150.00 GX-04 Comparator Output $265.00 GX-06 Analog Output $840.00 GX-10 Glass Breeze Break 6.4(W) x 7.7(D) x 8.2(H) inches $275.00 SW:128 - Foot Switch $75.00 AX-073003691-S - In Use Cover $21.00 AD-8121B Multi-Function Printer $850.00 RS-232 to pc (9 pin connector - DB9) $49.00 RS-232 to pc (25 pin connector - DB25) $50.00 AD-1682 Rechargeable Battery Pack $645.00 AD-1683 - Static Eliminator $1195.00 AD-8920 - Universal Remote Display $250.00 AD-8922 - Remote Controller $600.00

Optional Calibration weight and weight sets. 200g ASTM Class 2 (± 1.0 mg) with NO Cert $87.00 200g ASTM Class 1 (± 0.50mg) with NVLAP Cert $252.00 100g ASTM Class 2 (± 0.50 mg) with NO Cert $72.00 100g ASTM Class 1 (± 0.25 mg) with NVLAP Cert $145.00 1g-200g 10 piece Class 1 Mass Set with NVLAP Cert $1210.00 9 pc. Weight Set (100 g - 1 g) Class 1 with NVLAP $1095.00 1mg-100g 21 Piece Class 1 Weight Set with NVLAP Cert $2059.00 Cal-Paks 200g, 20g, 200mg Class 1 with NVLAP $379.00 Cal-Paks 200g, 20g, 2g Class 1 with NVLAP $386.00 Note: See our complete line of certified weights and weight sets here.

Weighing Pan YWP06G Weigh Pan 3.25" Dia. x 0.75" depth $30.00

Select from 13 different balances to meet your specific weighing needs
Model	Cap (g) x Read (g)	Price
GF-200	210 x 0.001 g	$1070.00
GF-300	310 x 0.001 g	$1252.50
GF-400	410 x 0.001 g	$1425.00
GF-600	610 x 0.001 g	$1910.00
GF-800	810 x 0.001 g	$2094.00
GF-1000	1100 x 0.001 g	$2246.25
GF-1200	1210 x 0.01 g	$1032.00
GF-2000	2100 x 0.01 g	$1070.00
GF-3000	3100g x 0.01g	$1252.50
GF-4000	4100 x 0.01 g	$1528.00
GF-6000	6100g x 0.1g	$1425.00
GF-6100	6100 x 0.01 g	$2062.50
GF-8000	8100 x 0.1 g	$1671.00

Learn more about the AND FX-700CT as we demonstrate the balance and show you all the features this precision milligram weighing instrument offers. Basically the FX-700CT (152g x 0.001g) is the same balance as the HR-150a (152g x 0.0001g) but the FX-700CT displays 1/10 the resolution. If you want to learn more about the HR-a Series this video is well worth watching.

Before you make your final decision for purchasing your next milligram balance be sure to see the Sartorius Entris Series. Take your pick either motorized internal calibration with the Sartorius Entris323i-1S, 423i-1S or 623i-1S milligram balances. Want to spend a lot less and willing to give up motorized internal calibration then review these Entris balances that are external calibration only-Sartorius Entris323-1S, 423-1S or 623-1S. The Sartorius Entris 3 decimal place balances offer a circular draftshield that you load from the top. See the quick settling time as we place calibration weights on the weighing platform.

Sartorius Secura Laboratory Balance offer advanced weighing features compliant with the USP minimum sample weight requirements. The balance's display indicates when the minimum sample weight is below the required minimum weight limit. Secura guarantees high reliability and security in regulated areas for the most common weighing ranges. Quintix is convenience in operation, calibration and data transfer. Even Practum features weighing technology at the highest quality level.

Copyright © 1995 - 2018 Precision Weighing Balances, All Rights Reserved.  This site is owned and operated by Precision Weighing Balances who is an Authorized A&D Weighing Dealer.

Disclaimer/Legal Information      Sitemap