The 402LB Beam Scale comes with height rod, counterweights and the beam weighs in pounds only with engraved numerals on both side of the beam.  All Healthometer mechanical beam scale weigh up to 350 lbs but with the additional counter weights you'll be able to weigh up to 500lbs. 

To use the counterweights it works like this:

For 150 lb counterweight only: If the weight of the patient is between 350 lbs and 424 lbs

1. Place the large (lower) poise weight in the 250 lb notch.
2. Hang 150 lb counterweight in notch on lower poise bar between 50 lbs and 100 lbs.
3. Weigh the patient normally using the small and large poise weights.
4. To arrive at the patient’s total weight, add the weights registered on the small and large poises and add 88 lbs. Refer to the enclosed quick reference guide to arrive at the total weight.

If the weight of the patient is between 425 lbs and 500 lbs

1. Place the large (lower) poise weight in the 250 lb notch.
2. Hang 150 lb counterweight in notch on lower poise bar between 150 lbs and 200 lbs.
3. Weigh the patient normally using the small and large poise weights.
4. To arrive at the patient’s total weight, add the weights registered on the small and large poises and add 150 lbs. Refer to the enclosed quick reference guide to arrive at the total weight.

The 402LB is sometimes used for weigh-ins at sanctioned boxing or wrestling matches.  The 402LB provides unmatched accuracy and durability demanded in the boxing world.   Features a sturdy, steel measuring rod for height measurements from 24" to 84".  Heavy duty steel base and lever system.  DURA-TOP platform cover is easy to clean.  Easy to assemble.

Measures weight up to 500 pounds in 1/4-pound increments (most household scales are accurate only to the pound).  A large, easy-to-read measuring bar with engraved pound increments make weights easier to read.  Unlike many home models, it operates precisely when used on carpeting.  Non-slip, vinyl-covered platform measures 10 1/2" x 14".  Hardened steel pivots and bearings; heavy-gauge enameled steel base and upright.  The base alone weighs only 21 lbs.  The entire unit weighs 50 lbs and ships via Ground for $40.00.

• Maximum-strength, unitized 3/32" steel, low-profile, non-tip base with steel boxed levers, 3/16" hardened pivots and hardened "V" bearings.



• Drawn metal head horn/pillar construction with protective rolled edges, rounded corners and baked enamel finish.



• Dimensions:
10-1/2" x 20" x 57-1/4"


• Warranty:  Ten years from Health O Meter.