
Ohaus Triple Beam 760-00 features a fixed stainless steel plate 6 inch diameter with a tare beam allowing you to tare containers placed on the weighing pan up to 225 grams and zeroing out the weight of the container. The only difference between the Ohaus triple beam 760 and the Ohaus 750-S0 is the 760-00 has the tare beam while the 750-S0 does not have the ability to tare out a container. Features three notched and tiered beams with center reading; sliding poise; zero adjust compensator; magnetic damping; equipped for specific gravity weighing - 1/2 inch hole in base for lab rod, provision for suspending sample below platform; and die cast aluminum boxed end beam.
Ohaus Triple Beam balance deliver accuracy and dependability time and time again. The 750-00 triple beam is backed with a 5 year limited manufacturer warranty from Ohaus Corp against factory defects.
Ohaus offers 9 different triple beam balances to choose from with different weighing platforms, notched and tiered beams with center reading. The DialOGram has magnetic damping and dial operation for fine weighing. These models include:
Ohaus 710-00 Triple Beam, Removable Stainless Steel Pan
Ohaus 710-T0 Triple Beam, Removable Stainless Steel Pan & Tare
Ohaus 720-00 Triple Beam, Polypropylene Scoop
Ohaus 720-S0 Triple Beam, Stainless Steel Scoop
Ohaus 730-00 Triple Beam, Animal Container
Ohaus 750-S0 Triple Beam, Fixed Stainless Steel Plate
Ohaus 760-00 Triple Beam, Fixed Stainless Steel Plate & Tare
Ohaus 1610-00 Dial-O-Gram® Triple Beam Balance, Removable Stainless Steel Pan and Tare
Ohaus 1650-00 Dial-O-Gram® Triple Beam Balance, Fixed Stainless Steel Plate and Tare
Ohaus has a great flash tutorial explaining how a triple beam balance works and a second tutorial on the setup here.
Before weighing on your triple beam you need to "zero" the balance. Do this by sliding back all the weight poises (that slide along the beams) so that the pointer is right at the zero line. You might need to turn the quick-zeroing adjustment knob located under the weighing platform a little bit to get it right at the line.
When you set an object on the balance platform, the pointer immediately goes up and is no longer zeroed. To find out the weight of the object, you'll need to slide the weight poises until the pointer is at zero again. Start with the two heavier weight poises and then use the lightest one to do the fine tuning.
To read the weight of an object in grams, add up the number that each weight poise is at when the pointer zeroes. For example, if the heaviest poise is at 400 g, the next one at 40 g, and the lightest one at 6.9 g, then the total weight of the object is 446.9 grams.
|
Ohaus Beam Scale 760-00
|
Untitled Document
Ohaus
Triple Beam Series

Image above is the Ohaus 750-SO |
Whether
you're weighing solids, liquids, powders or even animals, an Ohaus
Triple Beam balance is well-equipped to handle the job. The
700/800 Series provides the convenience of a toploading balance with
the durability and versatility to accommodate a range of lab applications.
Some models have a tare beam to allow
containers up to 225g to be balanced out, and a variety of weighing
platforms are also available.
Three notched and tiered beams with center reading
Four weighing platforms to choose from
Spring loaded zero adjust compensator
Models |
760-00 |
Your
Price |
$153.75 |
S&H
via UPS Ground Service in the lower 48 states |
$17.50 |
Use Paypal for orders in the lower 48 states shipped via UPS Ground |
|
Capacity |
610g |
Capacity
w/Accessory mass set |
|
Readability |
0.1g |
Calibrations:
Front beam
Middle beam
Rear beam |
10g
x 0.1g
100g x 10g
500g x 100g
|
|
x |
|
x |
Take
a close-up detailed look at the specifications & picture of the
balance. |
|
OHAUS'
COMPETITORS 3 BEAM BALANCE
Make
sure you see the MyWeigh
3 Beam Balance at $94.95
 |
Finally someone
has brought to the marketplace a triple beam balance that is high
quality and economically priced. Priced
lower than Ohaus and the My Weigh comes standard with the attachment weights.
2610g x 0.1g. Click here
for details. |
|
|
| Copyright © 2012 Precision Weighing Balances, All Rights Reserved.
This site is owned and operated by Precision Weighing Balances and is not sponsored or affiliated with Ohaus. Ohaus® is a registered trademark of Ohaus Corporation. For warranty, parts and technical related issues please call Ohaus directly at 973-377-9000. |
Disclaimer/Legal Information Sitemap
|