Ohaus Triple Beam 710-T0 features a removable stainless steel pan 6 inch diameter with a tare beam allowing you to tare containers placed on the weighing pan up to 225 grams. The 3/4 inch deep pan prevents cylindrical objects like an ostrich or emu egg from rolling off the flat stainless steel plate like that of the model 750-00 from Ohaus. Three notched and tiered beams with center reading

Ohaus Triple Beam balance deliver accuracy and dependability time and time again. The 710-T0 triple beam is backed with a 5 year limited manufacturer warranty from Ohaus Corp against factory defects.

Ohaus offers 9 different triple beam balances to choose from with different weighing platforms, notched and tiered beams with center reading. The DialOGram has magnetic damping and dial operation for fine weighing. These models include:

Ohaus 710-00 Triple Beam, Removable Stainless Steel Pan

Ohaus 710-T0 Triple Beam, Removable Stainless Steel Pan & Tare

Ohaus 720-00 Triple Beam, Polypropylene Scoop

Ohaus 720-S0 Triple Beam, Stainless Steel Scoop

Ohaus 730-00 Triple Beam, Animal Container

Ohaus 750-S0 Triple Beam, Fixed Stainless Steel Plate

Ohaus 760-00 Triple Beam, Fixed Stainless Steel Plate & Tare

Ohaus 1610-00 Dial-O-Gram® Triple Beam Balance, Removable Stainless Steel Pan and Tare

Ohaus 1650-00 Dial-O-Gram® Triple Beam Balance, Fixed Stainless Steel Plate and Tare

Ohaus has a great flash tutorial explaining how a triple beam balance works and a second tutorial on the setup here.

Before weighing on your triple beam you need to "zero" the balance. Do this by sliding back all the weight poises (that slide along the beams) so that the pointer is right at the zero line. You might need to turn the quick-zeroing adjustment knob located under the weighing platform a little bit to get it right at the line.

When you set an object on the balance platform, the pointer immediately goes up and is no longer zeroed. To find out the weight of the object, you'll need to slide the weight poises until the pointer is at zero again. Start with the two heavier weight poises and then use the lightest one to do the fine tuning.

To read the weight of an object in grams, add up the number that each weight poise is at when the pointer zeroes. For example, if the heaviest poise is at 300 g, the next one at 90 g, and the lightest one at 1.9 g, then the total weight of the object is 391.9 grams.

Ohaus School Balance 710-T0

Ohaus Triple Beam Series Image above is the Ohaus 750-SO See the correct image of the 710-T0 HERE Whether you're weighing solids, liquids, powders or even animals, an Ohaus Triple Beam balance is well-equipped to handle the job.  The 700/800 Series provides the convenience of a toploading balance with the durability and versatility to accommodate a range of lab applications.  Some models have a tare beam to allow containers up to 225g to be balanced out, and a variety of weighing platforms are also available.

• Three notched and tiered beams with center reading • Four weighing platforms to choose from • Spring loaded zero adjust compensator Models 710-T0 Your Price $181.50 S&H via UPS Ground Service in the lower 48 states $17.50 Use Paypal for orders in the lower 48 states shipped via UPS Ground Capacity 610g Capacity w/Accessory mass set 2610g * optional 707-00 weight set required to extend capacity to 2610g Readability 0.1g Calibrations: Front beam Middle beam Rear beam 10g x 0.1g 100g x 10g 500g x 100g Tare capacity to 225g x Stainless steel pan (removable) Platform 6" dia x 8" D x Take a close-up detailed look at the specifications & picture of the balance. detailed specs OHAUS' COMPETITORS 3 BEAM BALANCE Make sure you see the MyWeigh 3 Beam Balance at $94.95 Finally someone has brought to the marketplace a triple beam balance that is high quality and economically priced.  Priced lower than Ohaus and the My Weigh comes standard with the attachment weights. 2610g x 0.1g. Click here for details.

Disclaimer/Legal Information      Sitemap