6100g capacity with 0.1 readability and build to last with the Super Hybrid Sensor (SHS), since it is a rugged sensor by design, there is less chances for breakage. If it does break, we can isolate and repair the portion damaged, thus minimize the repair or service costs and downtime. Plus the GF-6100 digital balance can be purchased with the optional GX-02 USB Interface which replaces the RS-232 or to make things even easier purchase the optional USB to 25pin RS-232 Converter.

High performance and quality is shown with a 5 year manufacturer warranty. Review the manufacturer warranty from other manufacturer's and you'll see their warranty is a lot less. Plus if you ever need repair A&D Weighing has two facilities in the USA located in Georgia and California for fast turn around.

People constantly call Precision Weighing Balances asking for better deals on our products. We are an authorized A&D dealer and restricted from listing the GX6000 for any lower we could potentially lose our A&D Dealership. If you find the GF6000 anywhere online for even a penny less, then it is doubtful you are buying from an Authorized A&D dealer. You could be buying a gray market balance and it could be questionable if A&D USA would warranty the product.

Before purchasing the A&D GF6000 precision top-loader with 0.1 gram resolution, check out Sartorius GW6202 precision balance. People constantly call Precision Weighing Balances asking for better deals on our products. You'll get 10 times the accuracy with the Sartorius GW6202 and you'll sell it to you for a few hundred dollars more than the GF6000. The Sartorius GW6202 increments in 0.01 grams graduations while the GF6000 has resolutions only to 0.1 grams.

GW6202 digital precision balance offers a maximum weighing capacity of 6200 grams and readability to 0.01 gram intervals. This precision balance features a back-lit LCD display, HUGE 7.1" x 7.1" weighing platform [A&D GF6000 is only 6.5" x 6.5"], RS232 interface, parts counting mode, and internal calibration all for an unbelievably low price.

If the GF-6000 is too expensive and doesn't fit your budget we do have some other models we highly recommend you review that are more affordable like the Sartorius AZ6101, A&D EK6100i or A&D EJ6100 but these are all strain gauge base scales while the GF6100 is a SHS.

If price is absolutely critical and you want some lower quality 6100 gram digital scale with 0.1g readability then take a look at the low cost EPB-10K (10000g x 0.1g) or MyWeigh i11000 digital scale.

Free shipping UPS Ground in the lower 48 states on all AND GF lab balances at www.balances.com

A&D GF6000 Toploading Balance

The GF-Series offers all the spectacular features of the GX-Series except the internal motorized calibration feature has been removed.  Therefore, the GF6000 laboratory balance has the same display, features,  ip-65 rating, SHS technology except there is no internal calibration mass.  ISO 9000 procedures favor the calibration of balances with an external certified calibration mass.  A balance with internal motorized calibration weight is a nice feature, but costly.  Most balances with the internal calibration feature also offer external calibration.  External calibration is vital since it is much more convenient to send out the external calibration mass for recalibration/certification verses the costly fee of having the internal calibration mass removed from the balance and sent out for re-calibration. In addition, if you own several of the same balances just one external traceable calibration is needed for ISO compliance. Precision Weighing Balances always recommends that you purchase the calibration mass with any balance you select.  This allows you to calibrate the unit yourself without requiring the services of an outside calibration firm.  Best of all calibration couldn't be simpler.  Connect the AC adapter and warm up the balance with nothing on the weighing pan.  Then simply turn "ON" the balance, allow the balance to go through the power-up routine and then press and hold the "CAL" until "CALout" is displayed.  The display walks you through the cal procedure in less than 1 minute.  The entire cal is controlled by the user-friendly keypad.  The days of opening the balance and tweaking those potentiometers and trim resistors to calibrate a scale are gone with the advent of the digital circuit and EPROM technology first implemented by A&D Engineer's.

All A&D GF-Series come standard with built-in RS-232c and A&D WinCT balance communication software on CD-Rom to interface your balance with your computer.

A&D Model: GF-6000
Your Cost		$1328.25
Free UPS Ground shipping in the lower 48 states of USA
Weighing Capacity		6100 g
Minimum weighing value		0.1 g
Repeatability/Std. Dev.		0.1 g
Linearity		± 0.2 g
Tare Range		To capacity by subtraction
Stabilization time (Typical in FAST)		Approximately 1 second. Review the test data on response time
Sensitivity Drift		± 2ppm / °C (When automatic self calibration is not used)
Weigh Modes		g, oz, lb, lb:oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, %, and DS
Operating Temperature		5°C~40°C / 41°F~104°F RH less than 85%
Sensing Method		Super Hybrid Sensor (SHS)
Display Type		Vacuum Florescent Display (VFD)
Display Refresh		5 times/s, 10 times/s or automatic (Selectable)
Pan Size		165 x 165 mm / 6.5 x 6.5 inches
Counting mode	Min unit mass	0.1 g
	Number of sample	10, 25, 50 or 100 pieces
Percent mode	Min 100% reference mass	10.0 g
	Min 100% display	0.01%, 0.1%, 1% (Depends on the reference mass stored)
Breeze Break Dimensions	mm	Internal: 163(W) x 195 (D) x 208(H) mm (with optional GX-11 Glass Breeze Break)
	inch	Internal: 6.4(W) x 7.7(D) x 8.2(H) in (with optional GX-11 Glass Breeze Break)
Standard Interface		RS-232c with Windows Communication Tool (WinCT)
External calibration weights (optional accessory)		6000g 5000g 4000g
Calibration		Calibration requires the purchase of one of the masses listed above for the specific model.  The GF Series like many of the other A&D balances offers the ability to select different masses that best meets your weighing application for calibration.  To learn more about the selectable calibration setting click here.  We also offer a large selection of calibration masses here.  If you prefer internal motorized calibration see the GX-Series.
External Dimensions		210(W) x 317(D) x 86(H)
Power (AC Adapter )		100, 120, 220, 240 VAC (AC adapter) 50/60 Hz All balances shipped with 120V AC Adapter. Other voltages add $25.00
Net Weight (Approx.)		4.3 kg / 9.6 lb
Standard Accessories		Manual, AC Adapter, WinCT
Optional Accessories		RS-232C Cable,, SW-128 Foot Switch, Density Determination Kit, Cover, All Glass Draft Shield, Printer
Features - click each icons for more information
Download the GF Series Instruction Manual (1.94 MB) now   You need Adobe Acrobat Reader to view.  The instruction manual contains detail information regarding calibration, additional features and keypad functions. Download the manual for the Density Determination Kit (808KB), Comparator or Analog Output (1.22MB).
** Specifications subject to change without notice

A&D GF Series Toploader Balances Download the User Manual (2.0 MB) (select the model & any of the options below and then click the "BUY HERE" image) GF-200 [210g x 1mg] $997.15 GF-300 [310g x 1mg] $1128.05 GF-400 [410g x 1mg] $1328.25 GF-600 [610g x 1mg] $1778.70 GF-800 [810g x 1mg] $1951.95 GF-1000 [1100g x 1mg] $2028.95 GF-1200 [1210g x 0.01g] $958.65 GF-2000 [2100g x 0.01g] $997.15 GF-3000 [3100g x 0.01g] $1128.05 GF-4000 [4100g x 0.01g] $1428.35 GF-6100 [6100g x 0.01g] $1801.80 GF-6000 [6100g x 0.1g] $1328.25 GF-8000 [8100g x 0.1g] $1559.25

Options "N" Version designates NTEP (Legal for Trade) $100.00 AD-100-2 Digital Scale Anti-theft Device $65.00 RS-232 to USB converter kit for A&D Weighing Balances $99.95 GX-02 USB Option (replaces RS232 port with USB port) $140.00 GX-04 Comparator Output $249.00 GX-06 Analog Output $799.00 GX-11 Glass Breeze Break 6.4(W) x 7.7(D) x 8.2(H) inches $254.00 GX-12 - Animal Weighing Pan $175.00 SW:128 - Foot Switch $69.00 CC102E Carrying Case for GX/GF Series $175.00 AX-073003692-G - In Use Cover $17.00 AD-8121B Multi-Function Printer $779.00 RS-232 to pc (9 pin connector - DB9) $49.00 RS-232 to pc (25 pin connector - DB25) $49.00 AD-1682 Rechargeable Battery Pack $645.00 AD-1683 - Static Eliminator $1195.00 AD-8920 - Universal Remote Display $250.00 AD-8922 - Remote Controller $600.00

5 pc. Weight Set (1 kg - 100 g) Class 1 with NVLAP $811.00 1000g Calibration Weight Class 1 with NVLAP (± 2.5 mg) $214.00 1000g Calibration Weight Class 2 with NVLAP (± 5.0 mg) $204.00 1kg ASTM Class 6 (± 100 mg) cal mass (NO CERT) $40.00 2 kg Calibration Weight Class 1 with NVLAP (± 5 mg) $266.00 2 kg Calibration Weight Class 2 with NVLAP (± 10 mg) $264.00 2kg ASTM Class 6(± 200 mg) cal mass (NO CERT) $60.00 4kg Calibration Weight Class 2 with NVLAP (± 25 mg) $420.00 5kg Calibration Weight Class 1 with NVLAP (± 12 mg) $474.00 5kg ASTM Class 6 (± 500 mg) cal mass (NO CERT) $100.00 Cal-Paks 5kg, 500g, 2g Class 1 with NVLAP $1050.00 Cal-Paks 5kg, 500g, 20g Class 1 with NVLAP $1050.00

Select from 13 different balances to meet your specific weighing needs
Model	Cap (g) x Read (g)	Price
GF-200	210 x 0.001 g	$997.15
GF-300	310 x 0.001 g	$1128.05
GF-400	410 x 0.001 g	$1328.25
GF-600	610 x 0.001 g	$1778.70
GF-800	810 x 0.001 g	$1951.95
GF-1000	1100 x 0.001 g	$2028.95
GF-1200	1210 x 0.01 g	$958.65
GF-2000	2100 x 0.01 g	$997.15
GF-3000	3100g x 0.01g	$1128.05
GF-4000	4100 x 0.01 g	$1428.35
GF-6000	6100g x 0.1g	$1328.25
GF-6100	6100 x 0.01 g	$1801.80
GF-8000	8100 x 0.1 g	$1559.25

Copyright © 2012 Precision Weighing Balances, All Rights Reserved.  This site is owned and operated by Precision Weighing Balances who is an Authorized A&D Weighing Dealer.

Disclaimer/Legal Information      Sitemap