Counting scale rentals are going to be a thing of the past since now you can buy the VW-330A-C-50000 Counting Scale for less than the typically 2 week rental cost just so your company can perform the yearly inventory count.  This parts counting scale weighs up to 110 pounds and increments in 0.005 pound intervals.  Basically if the part you want to count weighs greater than an ounce (about the weight of 6 nickels taped together) you'll have no problem getting an accurate parts count.

If you are buying high octane gas to drive from home to work everyday, this is not likely the scale for you.  The VW-330A-C-50000 Inventory Counting Scale is the perfect choice if the parts you are counting have some weight to them.  There is no reason to pay $500, $600 or $1000 to count parts the 1" copper fitting if you are a plumber.  Basically if your part has some weight to it this is your scale.  This would not be your counting scale if you planned on counting body jewelry like those tongue studs and other body piercing jewelry pieces since these pieces will be to light too get an accurate count.

Counting scale with high or ultra high internal resolutions (1 part in a million or two million) and sensitivity.  What does this mean to my counting accuracy???  Almost nothing!

The internal resolution or sensitivity is the ability for the scale's internal analog-to-digital processor to identify and count the number of unfiltered divisions of the scale's or load cell's output.  Note: the scale output is usually about half of load cell output due to dead loading on the platter and some safety factors.

99% of the counting scales below $1000 are built with aluminum counterforce or also called load cell sensors.  They are typically accurate from 1 part in 3000 to 1 part in 10,000 divisions.  Yes, scales and balances can display the weight to 30,000 divisions or even up to 100,000 divisions, but they are not metrologically accurate to this level.  Sensitivity of 1 million count is the ability to further differentiate 100 divisions within 1 part in 10,000 divisions.  However, if the sensor is not accurate or linear, the counting accuracy has no relevance.  This is unlike lab scales with magnetic force sensors (the A&D FC-5000Si & FC500Si has a force motor) the linearity is much better than resistive strain gauge sensors where it measures the "bending of metals".

What is most important in load cell counting scale, similar to precision balances, is the quality of the sensor or load cell.  VW330AC uses one of the best and most costly HBM sensors which is known worldwide for its accuracy.  VMC puts your dollars into quality components and not marketing hypes.

Virtual Measurements & Controls (VMC) gives you value, quality and satisfaction.  VMC is a young 10 year old company with speed and agility to design, manufacture and bring the best products to you but without the overheads of other scale manufacturers.  The savings are all yours when you select the VW-330A-C-50000 Counting Scale.

VMC VW330-C-50000 Counting

VirtualMC VW-330A-C-50000 Counting Scale
Model	VW-330A-C-50000
MSRP	$432.00
PWB Discount Price	$360.00
S&H via UPS Ground	$20.00
Capacity x Readability (pounds)	110 lb x 0.002 lb
Capacity x Readability (kilograms)	50 kg x 0.002 kg
Linearity	± 0.002 lb
Repeatability	± 0.002 lb
Eccentric Error	± 0.002 lb
Hysteresis	± 0.004 lb
Stabilization Time	> 1.5 seconds
Zero (Tare) Range	100% of weighing capacity
Weighing Mode	lb, kg, pcs
Display	Large 0.47" LCD display with backlight
Pan Size (inches)	8.9" x 13.3"
Dimensions (inches)	11.2" x 13" x 5.1"
Lock-Down Capability	No
Auto Off	Yes
Power	Rechargeable battery (included) AC Adapter (included)
Low Battery Indicator	Yes
Auto Shutdown/Power Saving	Yes
External Calibration (NOT Included)	Minimum of 50% weighing capacity
Operating Temperature	32 - 104°F / 0 - 40°C
Shipping Weight	14 pounds
Net Weight	10 pounds
Warranty	1 Year Limited Manufacturers Warranty - Return to base California
Instruction Manual	Download the instruction manual for tons of information on how to operate scale.
Additional Features
Counting/Weighing Stable Indication Low Battery Indication Lack of sample, piece weight indication Alarm function to highlight shortage of sample	Large stainless steel weighing platter Ten numeric key for setting of sample number, sample weight 3 Column LCD weight display-Weight (kg), Unit Weight (g), Total (pcs) Over/Under Alarm Buzzer
Compare the VMC parts counter to our other available counting scales

Disclaimer/Legal Information      Sitemap