Counting scale rentals are going to be a thing of the past since now you can buy
the VMC VW-330A-C-30000 for less than the typical 2 week rental cost
just so your company can perform the yearly inventory count. This parts
counting scale weighs up to 66 pounds and increments in 0.002 pound intervals.
Basically if your parts are heavier than say the weight of three (3) nickels taped
together you'll have no problem getting an accurate parts count.
If you are buying high octane gas to drive from home to work everyday, this is
not likely the scale for you. The VW-330A-C-30000 inventory scale
is the perfect choice if the parts you are counting have some weight to them.
There is no reason to pay $500, $600 or $1000 to count parts the 1/2" copper
fitting if you are a plumber. Maybe you are a hardware manufacturer specializing
in selling door hinges in bulk and this counting scale can give you the right
count. Basically if your part has some weight to it this is your scale.
This would not be your counting scale if you planned on counting body jewelry
like those tongue studs and other body piercing jewelry pieces since these pieces
will be too light to get an accurate count.
Counting scale with high or ultra high internal resolutions (1 part in a million
or two million) and sensitivity. What does this mean to my counting accuracy???
The internal resolution or sensitivity is the ability for the scale's internal
analog-to-digital processor to identify and count the number of unfiltered divisions
of the scale's or load cell's output. Note: the scale output is usually
about half of load cell output due to dead loading on the platter and some safety
99% of the counting scales below $1000 are built with aluminum counterforce or
also called load cell sensors. They are typically accurate from 1 part in
3000 to 1 part in 10,000 divisions. Yes, scales and balances can display
the weight to 30,000 divisions or even up to 100,000 divisions, but they are not
metrologically accurate to this level. Sensitivity of 1 million count is
the ability to further differentiate 100 divisions within 1 part in 10,000 divisions.
However, if the sensor is not accurate or linear, the counting accuracy has no
relevance. This is unlike lab scales with magnetic force sensors (the A&D
FC-5000Si & FC500Si
has a force motor) the linearity is much better than resistive strain
gauge sensors where it measures the "bending of metals".
What is most important in load cell counting scale, similar to precision balances,
is the quality of the sensor or load cell. VW330AC uses one of the best and
most costly HBM sensors which is known worldwide for its accuracy. VMC puts
your dollars into quality components and not marketing hypes.
Virtual Measurements & Controls (VMC) gives you value, quality and satisfaction.
VMC is a young 10 year old company with speed and agility to design, manufacture
and bring the best products to you but without the overheads of other scale manufacturers.
The savings are all yours when you select the VW-330A-C-30000 Counting Scale.
VMC has ended business operations in the USA and NONE of the VMC models are available. Information on this web page is for reference only for our past customer's that purchased this digital scale and want to review the specification. If you need assistance selecting an alternative model give us a call at 978-521-7095 and a balance expert can assist in alternative models.
VMC VW-330A-C-30000 Inventory
|VirtualMC VW-330A-C-30000 Counting Scale
|PWB Discount Price
|S&H via UPS Ground
|Capacity x Readability (pounds)
||66 lb x 0.002 lb
|Capacity x Readability (kilograms)
||30 kg x 0.001 kg
||± 0.002 lb
||± 0.002 lb
||± 0.002 lb
||± 0.004 lb
||> 1.5 seconds
|Zero (Tare) Range
||100% of weighing capacity
||lb, kg, pcs
||Large 0.47" LCD display with backlight
|Pan Size (inches)
||8.9" x 13.3"
||11.2" x 13" x 5.1"
||Rechargeable battery (included)
AC Adapter (included)
|Low Battery Indicator
|Auto Shutdown/Power Saving
|External Calibration (NOT Included)
||Minimum of 50% weighing capacity
||32 - 104°F / 0 - 40°C
||1 Year Limited Manufacturers Warranty -
Return to base California
| Instruction Manual
|| Download the instruction manual for tons of information on how to operate scale.
Low Battery Indication
Lack of sample, piece weight indication
Alarm function to highlight shortage of sample
Large stainless steel weighing platter
Ten numeric key for setting of sample number, sample weight
3 Column LCD weight display-Weight (kg), Unit Weight (g), Total (pcs)
Over/Under Alarm Buzzer
|Compare the VMC parts counter to our other available counting scales
|Copyright © 2008 Precision Weighing Balances,
All Rights Reserved. This site is owned and operated by Precision
Weighing Balances who is an Authorized Virtual Measurements & Controls
(VMC) Dealer. For warranty, parts and technical related issues please
call VMC directly at 707-573-3111.
Disclaimer/Legal Information Sitemap